极速飞艇最快计划

The SWAM-BLASTER® line of Micro Abrasive Blasters are complete, accurate and precise. SWAM BLASTER® introduces a defined amount of abrasive powder into a controlled stream of compressed air through the abrasive pathway and out of a selected nozzle tip.

  • SWAM BLASTER®  provides Total Process Control with INDEPENDENTLY adjustable powder flow control and air pressure regulation.
  • When detail is required, the powder flow can be turned down to reduce the amount of powder being introduced into the abrasive pathway thus allowing the use of a very small nozzle tip. For more aggressive requirements, the air pressure, powder flow and the nozzle tip diameter can be increased.
  • Pressure Range: From < 1 psi to 140 psi, special design options for pressure up to 300 psi
  • Abrasive Particles Size Range: Sub-micron level up to 500 microns

Crystal Mark has developed a range of automated systems where SWAM BLASTER® products are integrated in production systems that use conveyor belt based machines, rotary abraders, or 3-axes CNC machines.

极速飞艇网

EV-2L SWAM BLASTER with TURBO-Station Work Chamber
EV-2L SWAM BLASTER with TURBO-Station Work Chamber

The basic design of the Model EV-2 Micro Abrasive Blaster and the Model EV-2L is an “Economical Version” for the moderate applications with brass fittings throughout the abrasive pathway.

 

The Model EV-2 has a nozzle range from .007” up to .040”.

 

For more aggressive applications that require a larger nozzle range, the Model EV-2L offers nozzle range from .018” up to .060”.

 

 

极速飞艇精准前三

SWAM BLASTER MV-2 with TURBO-Max Work Chamber
SWAM BLASTER MV-2 with TURBO-Max Work Chamber

The MV Series of SWAM BLASTERS offer “Maximum Versatility” with carbide lined fittings throughout the abrasive pathway. They have the tilting powder tank that is mounted to a hinged plate to allow it to tilt to the side. With the push of a button, the vibrator activates to simply walk the powder out for rapid powder changes.

 

The optimum nozzle range for the Model MV-2 is from 0.007” up to 0.040”. For more aggressive applications, the Model MV-2L has a nozzle range from 0.018” up to 0.060”.

 

The Model MV-241 Micro Abrasive Blaster combines the precise ability of the Model MV-2 and the aggressive attitude of the Model MV-2L into one unit. Users have the option to switch the nozzle range between 0.007” up to 0.040”, or from 0.018” up to 0.060”.

 

极速飞艇开奖助手

Crystal Mark Swam Blasters | LV-1, XV-1
Crystal Mark SWAM Blasters | LV-1, XV-1

The Model LV-1 (Large Volume) Micro Abrasive Blaster is best for operating in production lines and in the SWAM® Automated Systems. It holds approximately 20 pounds of aluminum oxide and has a separate mixing powder tank for a consistent powder feed rate from a full tank to an empty tank.

 

For applications where the Model LV-1 is not quite enough, the Model XV-1 (XstreamTM Volume) Micro Abrasive Blaster is the solution for the heaviest output requirements.

 

The Model LV-1 works very well with a nozzle range from .018” up to .060”.

 

For the Model XV-1, the optimum nozzle range is .032” up to .090”.

 

极速飞艇单双

Micro SWAM BLASTER™ | AERO-Blaster™
Micro SWAM BLASTER™ | AERO-Blaster™

The AERO-Blaster™ functions by using a rechargeable 6 volt installed battery that runs both the foot pedal and pinch valve.

The only other input required to use AERO-Blaster™ is dry air supply.

 

It is the smallest of different types of Crystal Mark SWAM BLAST micro abrasive machines, very well suited for small applications that need precision.

 

Learn more about AERO-Blaster™ >>



澳洲幸运10预测软件下载 极速赛车官网结果 澳洲幸运5精准两期计划 快乐飞艇计划全天